latest news

New Year wishes 2019

We would like to thank  you   for your confidence and cooperation in this year. To the New Year 2019  we wish you a lot of health, happiness and success in work  and personal life.

We are looking forward to further cooperation with you.

Your  KONTURA Team

New Year wishes 2019
20. 12. 2018

Thank you for the visit on EUROBLECH 2018

We thank all visitors for visiting our partners' stands at EUROBLECH 2018 in Hannover.

Thank you for the visit on EUROBLECH 2018
29. 10. 2018

Thanks for the visit on MSV 2018

Thank you for visiting our stand and we will be glad if we can welcome you next year, too.

The MSV will take place on 5 days from Monday, 07. October to Friday, 11. October 2019 in Brno.We will look forward to enjoying our traditional location, in Hall B.

Thanks for the visit on MSV 2018
09. 10. 2018

Invitation to MSV 2018, 1.10.-5.10.2018

Dear our business friends!

The jubilee 60th International Engineering Fair knocks the door. The MSV will be held from 1st to 5th October 2018.
 We would like to invite you to visit our stand NO.: 057 in Pavilion B.


We are  looking forward to your visit in our stand
Your KONTURA TOOLS

Invitation to MSV 2018, 1.10.-5.10.2018
01. 09. 2018

100th ANNIVERSARY OF AGATHON COMPANY

The Swiss company Agathon founded 100 years ago by Mr. Leo Pfluger in 1918.


From the beginning, Agathon has been dealing with the precision of the guiding elements.

100th ANNIVERSARY OF AGATHON COMPANY
02. 03. 2018

75TH ANNIVERSARY OF BRUDERER COMPANY

It all started 75 years ago when BRUDERER company founded Mr. Egon Bruderer. His work has made BRUDERER famous throughout the world with high quality pressing.

75TH ANNIVERSARY OF BRUDERER COMPANY
01. 03. 2018

New Year wishes 2018

Dear business partners!

We would like to wish you merry Christmas, full of joy, tranquility, fulfilled wishes, nice meetings and magical moments.

At the same time we thank you very much for your favor and we look forward to further cooperation in 2018.

Your KONTURA

New Year wishes 2018
15. 12. 2017

Thanks for the visit on MSV 2017

Thank you very much for visiting our stand on International Engineering Fair and we will be glad if we can welcome you next year,too.
The jubilee 60th MSV will be held from 1st to 5th October 2018.

Thanks for the visit on MSV 2017
16. 10. 2017

Invitation to MSV 2017, 9.10.-13.10.2017

Dear business friends!
The International fair is already outside the door and therefore we would like to invite you to our stand.
You will find us in hall B, stand 57.

We look forward to you!
Your KONTURA
 

 

 

Invitation to MSV 2017, 9.10.-13.10.2017
02. 10. 2017

Holiday in Kontura Tools

Notice:


Dear Business Partners!
We would like to inform you that the whole company KONTURA TOOLS s.r.o. will have holiday in the period from July 31, 2017 to August 11,2017. We kindly ask you to send your potential orders and  requests except this period. Thank you very much for understanding.

Your Kontura

Holiday in Kontura Tools
11. 07. 2017

MSV 2017, BRNO

Dear business partners,

The International Engineering Fair will take place this year from 9th to 13th October at the Exhibition Center in Brno, whose preparations are in full processing.
  Again, the main theme will be "Industry 4.0 or the Fourth Industrial Revolution".

We will be glad to welcome you again on our stand, 57.

MSV 2017, BRNO
25. 04. 2017

Happy Easter

We wish to everyone wonderful blessed Easter.

Your KONTURA

Happy Easter
13. 04. 2017

Training in BRUDERER, Switzerland

In the last week, our team attended training on high-speed presses in BRUDERER in Switzerland.

 

Training in BRUDERER, Switzerland
17. 01. 2017

New Year wishes 2017

Dear business partners!

We would like to thank you for your cooperation in 2016 and  wishing you many personal and professional successes in 2017.

New Year wishes 2017
14. 12. 2016

EuroBLECH 2016, Hannover, Germany

Our partners exhibiting at the largest trade fair for sheet metal processing EuroBLECH, 2016.
Date:

 from 25th October to 29th October 2016

Opening time:

Tuesday to Friday from 9a.m. to 6p.m.

Saturday from 9a.m. to 3p.m.

EuroBLECH 2016, Hannover, Germany
25. 10. 2016

Looking back to the International Engineering Fair 2016

We would like to thanks all visitors for visiting our stand at the International Engineering Fair 2016 in Brno.

Looking back to the International Engineering Fair 2016
10. 10. 2016

15th anniversary of the KONTURA TOOLS

On the occasion of the 15th anniversary of the company KONTURA TOOLS, we would like to sincerely thank you for the cooperation to our partners, customers and colleagues, but also directors of the company, Mr. Volejník.

Thanks to all of you that our company KONTURA TOOLS could celebrated the 15th anniversary on the Czech and Slovak market.

 

 
15th anniversary of the KONTURA TOOLS
09. 09. 2016

AGENCY OF THE COMPANY DI.GI.EMME, tools for transfer systems and complete transfer lines according to customers

Representation with new partner Di.Gi.Emme for Czech and Slovak market, we can offer the transfer technology (the tools and transfer units) to complete transfer lines.

Compared to the production technology of progressive tools achieve significant savings material.

 

AGENCY OF THE COMPANY DI.GI.EMME, tools for transfer systems and complete transfer lines according to customers
09. 05. 2016

AGENCY OF THE COMPANY OTI PRESSE, MECHANICAL, LEVER DRIVE AND TRANSFER PRESSES

Agency of the company Oti Presse (Officine Tecnomeccaniche Italiane) we are expanding our range stamping technology of significant partner. We come up with an offer for the supply of mechanical presses from 600kN to 8000kN.

 

 

AGENCY OF THE COMPANY OTI PRESSE, MECHANICAL, LEVER DRIVE AND TRANSFER PRESSES
09. 05. 2016

MSV 2016, BRNO

Dear business partners!

We are preparing the next edition of the International fair which will take place between 3rd October to 7th October 2016. So, you can note this date to your calendar. As always, we will be really pleased to meet you in Brno.

You will find us on same place as last year, hall B, stand 65.

 

MSV 2016, BRNO
07. 03. 2016

FIRST STEPS IN STAMPING

Already in elementary schools lead our children to stamping.

The first steps in learning the pressing technique: cutting, straightening and bending, Lucie, 11 years.

FIRST STEPS IN STAMPING
26. 01. 2016

New Year wishes 2016

Dear business partner!

We would like  to thank you  on behalf  of our company  Kontura Tools s.r.o. for your cooperation and next year we wish you a lot of success in work  and personal life.

We look forward to further cooperation.

 Your KONTURA

New Year wishes 2016
16. 12. 2015

Looking back to the Blechexpo 2015

We would like to thanks all visitors for visiting our partners' booths at the fair Blechexpo 2015 in Stuttgart.

Looking back to the Blechexpo 2015
09. 11. 2015

Blechexpo 2015, Stuttgart

During entire Blechexpo Fair 2015 from 3.-6. November will be for you avaible Mr. Dušan Volejník, director Kontura Tools and representative of our partners on the Czech and Slovak market. You can find him on the stands of our partners or on the mobile phone + 420 777 945 957.

We are looking forward to your visit.

Blechexpo 2015, Stuttgart
07. 10. 2015

Blechexpo 2015, Stuttgart

As an innovation, Agathon AG shows at the Blechexpo  the further development of the backlash-free Round Fine Centering System for centering two plates/mold halves in mold construction (patent pending).

Hall 5, stand 5409

Blechexpo 2015, Stuttgart
02. 10. 2015

Blechexpo 2015, Stuttgart

We would like to invite you to the 12. Blechexpo exhibition in Stuttgart from 3. – 6. November 2015, where Bruderer will present the best from stamping world.


Hall 7, stand 7209.

Blechexpo 2015, Stuttgart
30. 09. 2015

Expression of thanks, MSV 2015, Brno

We appreciate the chance of meeting you in our stand during passed International Engineering Fair and we look forward to meeting you again in 2016. Thank you very much .

KONTURA TOOLS team

Expression of thanks, MSV 2015, Brno
25. 09. 2015

MSV 2015, Brno

As usual, we exhibit our products with our partners at the Engineering Trade Fair in Brno, stand 048, hall B.

During the period from September 14, 2015 to September 18, 2015, we will be pleased to welcome you at the stand of the company KONTURA TOOLS at hall B, stand 048.

 

MSV 2015, Brno
07. 07. 2015

New catalogues of the company AGATHON AG

In 2012, the company AGATHON AG is coming with its new catalogue of guide elements. It contains new technical solutions, including patented new products.

The catalogue will be prepared for distribution in its printed form, including CD, from February 2012.

 

 

 

New catalogues of the company AGATHON AG
05. 02. 2012

New agency of the company SCHMID

With the new shareholder of the company FEINTOOL AG, restructuring of the company FEINTOOL is also starting, including its branches.

New agency of the company SCHMID
04. 06. 2011

Centring system for moulds and stamping tools - FEINZENTRIERUNG

With continuously increasing requirements for accuracy of plastic stamped parts, we present to you a new product, the centring system of guides from the company Agathon with prestressed rollers (patent) for demanding applications of injection moulding.

 

Centring system for moulds and stamping tools - FEINZENTRIERUNG
01. 06. 2011

Expression of thanks, MSV 2010, Brno

We thank our customers for visiting our stand at the trade fair.


We exhibit our products for you and thanks to you. We look forward to meeting with you again in 2011.

 

Expression of thanks, MSV 2010, Brno
30. 09. 2010

Die set of CARBON from the company AGATHON AG

Nonsense at the first sight? No! Thanks to its properties, CARBON is very suitable for producing plates and die sets.

Die set of CARBON from the company AGATHON AG
05. 01. 2010

BRUDERER with long table 1250 mm is here!

The automatic press BSTA 510-125B is taking up a leading position. For demanding applications in the automotive sector, the automatic machine offers the table longer by 15 cm, thus meeting the requirements for progressive module tools.

BRUDERER with long table 1250 mm is here!
30. 04. 2009

Straightening machines of parts SCHUBERT have been taken over by the company SOPREM

After transferring the SCHUBERT brand under the company SOPREM, today machines for straightening of parts are produced combining two advantages – the design of the company SCHUBERT and the driving and control units of the company SOPREM.

Straightening machines of parts SCHUBERT have been taken over by the company SOPREM
04. 04. 2009

Equipment for grinding of piercing punches DIN, ISO and others – total length up to 120 mm.

Operative helper directly in the stamping shop and tooling shop.

The agent is designed for grinding of shearing diameters of stepped punches and, if necessary, also their shortening. You can simply change the diameter of piercing punches to the required value.

24. 03. 2009

Agency of the company Märkische Stanz-Partner GmbH – standard squares for stamping tools

Dear business partners,
I am very pleased to present to you new products of the company MSPN. The company Märkische Stanz-Partner, with its registered office at Lüdenscheid /DE/, is a traditional supplier of standard squares for stamping tools.
 

Agency of the company Märkische Stanz-Partner GmbH – standard squares for stamping tools
01. 12. 2008

Agency of the company AGATHON, guide elements for stamping tools and moulds

Dear business friends,
I am pleased to inform you of our new partner with whom we will cooperate in the Czech and Slovak markets.

Agency of the company AGATHON, guide elements for stamping tools and moulds
18. 11. 2008

New agency of the company SOPREM

At the beginning of 2008, the company KONTURA TOOLS s.r.o. got an important agency, the Swiss company SOPREM AUTOMATION AG.

New agency of the company SOPREM
02. 03. 2008

Calendars for 2008

Traditionally, our Swiss partners, i.e. the companies FEINTOOL and BRUDERER, have prepared for you wall calendars for the following year.

Calendars for 2008
15. 11. 2007

Manual ”Forming and fineblanking“

The manual ”Forming and fineblanking“ includes the complex description of material properties and technology of producing highly resistant and precise parts from steel with high strength.

Manual ”Forming and fineblanking“
24. 08. 2007

Servo feed units, type BSV in ”stand alone“ design

Putting the servo feed units on the market as integrated solutions for the B-control in spring 2005 was only followed by the control-independent variants as ”stand alone“ design to be retrofitted to Bruderer stamping presses.

Servo feed units, type BSV in ”stand alone“ design
10. 07. 2007

Highly efficient automatic press BSTA 200-60BE

Especially due to the pressure from Asia and Eastern Europe, the optimal possibilities of reducing production costs are more and more taken into consideration through automations and constantly increasing speeds. However, investment costs will become more and more important.

Highly efficient automatic press BSTA 200-60BE
08. 07. 2007

Fineblanking – more than only a method of production

The process chain for sheet metal processing has changed fundamentally over the last 20 years.

Fineblanking – more than only a method of production
02. 07. 2007

New Year wishes 2019

We would like to thank  you   for your confidence and cooperation in this year. To the New Year 2019  we wish you a lot of health, happiness and success in work  and personal life.

We are looking forward to further cooperation with you.

Your  KONTURA Team

New Year wishes 2019
20. 12. 2018

Thank you for the visit on EUROBLECH 2018

We thank all visitors for visiting our partners' stands at EUROBLECH 2018 in Hannover.

Thank you for the visit on EUROBLECH 2018
29. 10. 2018

Thanks for the visit on MSV 2018

Thank you for visiting our stand and we will be glad if we can welcome you next year, too.

The MSV will take place on 5 days from Monday, 07. October to Friday, 11. October 2019 in Brno.We will look forward to enjoying our traditional location, in Hall B.

Thanks for the visit on MSV 2018
09. 10. 2018

Invitation to MSV 2018, 1.10.-5.10.2018

Dear our business friends!

The jubilee 60th International Engineering Fair knocks the door. The MSV will be held from 1st to 5th October 2018.
 We would like to invite you to visit our stand NO.: 057 in Pavilion B.


We are  looking forward to your visit in our stand
Your KONTURA TOOLS

Invitation to MSV 2018, 1.10.-5.10.2018
01. 09. 2018

100th ANNIVERSARY OF AGATHON COMPANY

The Swiss company Agathon founded 100 years ago by Mr. Leo Pfluger in 1918.


From the beginning, Agathon has been dealing with the precision of the guiding elements.

100th ANNIVERSARY OF AGATHON COMPANY
02. 03. 2018

75TH ANNIVERSARY OF BRUDERER COMPANY

It all started 75 years ago when BRUDERER company founded Mr. Egon Bruderer. His work has made BRUDERER famous throughout the world with high quality pressing.

75TH ANNIVERSARY OF BRUDERER COMPANY
01. 03. 2018

New Year wishes 2018

Dear business partners!

We would like to wish you merry Christmas, full of joy, tranquility, fulfilled wishes, nice meetings and magical moments.

At the same time we thank you very much for your favor and we look forward to further cooperation in 2018.

Your KONTURA

New Year wishes 2018
15. 12. 2017

Thanks for the visit on MSV 2017

Thank you very much for visiting our stand on International Engineering Fair and we will be glad if we can welcome you next year,too.
The jubilee 60th MSV will be held from 1st to 5th October 2018.

Thanks for the visit on MSV 2017
16. 10. 2017

Invitation to MSV 2017, 9.10.-13.10.2017

Dear business friends!
The International fair is already outside the door and therefore we would like to invite you to our stand.
You will find us in hall B, stand 57.

We look forward to you!
Your KONTURA
 

 

 

Invitation to MSV 2017, 9.10.-13.10.2017
02. 10. 2017

Holiday in Kontura Tools

Notice:


Dear Business Partners!
We would like to inform you that the whole company KONTURA TOOLS s.r.o. will have holiday in the period from July 31, 2017 to August 11,2017. We kindly ask you to send your potential orders and  requests except this period. Thank you very much for understanding.

Your Kontura

Holiday in Kontura Tools
11. 07. 2017

MSV 2017, BRNO

Dear business partners,

The International Engineering Fair will take place this year from 9th to 13th October at the Exhibition Center in Brno, whose preparations are in full processing.
  Again, the main theme will be "Industry 4.0 or the Fourth Industrial Revolution".

We will be glad to welcome you again on our stand, 57.

MSV 2017, BRNO
25. 04. 2017

Happy Easter

We wish to everyone wonderful blessed Easter.

Your KONTURA

Happy Easter
13. 04. 2017

Training in BRUDERER, Switzerland

In the last week, our team attended training on high-speed presses in BRUDERER in Switzerland.

 

Training in BRUDERER, Switzerland
17. 01. 2017

New Year wishes 2017

Dear business partners!

We would like to thank you for your cooperation in 2016 and  wishing you many personal and professional successes in 2017.

New Year wishes 2017
14. 12. 2016

EuroBLECH 2016, Hannover, Germany

Our partners exhibiting at the largest trade fair for sheet metal processing EuroBLECH, 2016.
Date:

 from 25th October to 29th October 2016

Opening time:

Tuesday to Friday from 9a.m. to 6p.m.

Saturday from 9a.m. to 3p.m.

EuroBLECH 2016, Hannover, Germany
25. 10. 2016

Looking back to the International Engineering Fair 2016

We would like to thanks all visitors for visiting our stand at the International Engineering Fair 2016 in Brno.

Looking back to the International Engineering Fair 2016
10. 10. 2016

15th anniversary of the KONTURA TOOLS

On the occasion of the 15th anniversary of the company KONTURA TOOLS, we would like to sincerely thank you for the cooperation to our partners, customers and colleagues, but also directors of the company, Mr. Volejník.

Thanks to all of you that our company KONTURA TOOLS could celebrated the 15th anniversary on the Czech and Slovak market.

 

 
15th anniversary of the KONTURA TOOLS
09. 09. 2016

AGENCY OF THE COMPANY DI.GI.EMME, tools for transfer systems and complete transfer lines according to customers

Representation with new partner Di.Gi.Emme for Czech and Slovak market, we can offer the transfer technology (the tools and transfer units) to complete transfer lines.

Compared to the production technology of progressive tools achieve significant savings material.

 

AGENCY OF THE COMPANY DI.GI.EMME, tools for transfer systems and complete transfer lines according to customers
09. 05. 2016

AGENCY OF THE COMPANY OTI PRESSE, MECHANICAL, LEVER DRIVE AND TRANSFER PRESSES

Agency of the company Oti Presse (Officine Tecnomeccaniche Italiane) we are expanding our range stamping technology of significant partner. We come up with an offer for the supply of mechanical presses from 600kN to 8000kN.

 

 

AGENCY OF THE COMPANY OTI PRESSE, MECHANICAL, LEVER DRIVE AND TRANSFER PRESSES
09. 05. 2016

MSV 2016, BRNO

Dear business partners!

We are preparing the next edition of the International fair which will take place between 3rd October to 7th October 2016. So, you can note this date to your calendar. As always, we will be really pleased to meet you in Brno.

You will find us on same place as last year, hall B, stand 65.

 

MSV 2016, BRNO
07. 03. 2016

FIRST STEPS IN STAMPING

Already in elementary schools lead our children to stamping.

The first steps in learning the pressing technique: cutting, straightening and bending, Lucie, 11 years.

FIRST STEPS IN STAMPING
26. 01. 2016

New Year wishes 2016

Dear business partner!

We would like  to thank you  on behalf  of our company  Kontura Tools s.r.o. for your cooperation and next year we wish you a lot of success in work  and personal life.

We look forward to further cooperation.

 Your KONTURA

New Year wishes 2016
16. 12. 2015

Looking back to the Blechexpo 2015

We would like to thanks all visitors for visiting our partners' booths at the fair Blechexpo 2015 in Stuttgart.

Looking back to the Blechexpo 2015
09. 11. 2015

Blechexpo 2015, Stuttgart

During entire Blechexpo Fair 2015 from 3.-6. November will be for you avaible Mr. Dušan Volejník, director Kontura Tools and representative of our partners on the Czech and Slovak market. You can find him on the stands of our partners or on the mobile phone + 420 777 945 957.

We are looking forward to your visit.

Blechexpo 2015, Stuttgart
07. 10. 2015

Blechexpo 2015, Stuttgart

As an innovation, Agathon AG shows at the Blechexpo  the further development of the backlash-free Round Fine Centering System for centering two plates/mold halves in mold construction (patent pending).

Hall 5, stand 5409

Blechexpo 2015, Stuttgart
02. 10. 2015

Blechexpo 2015, Stuttgart

We would like to invite you to the 12. Blechexpo exhibition in Stuttgart from 3. – 6. November 2015, where Bruderer will present the best from stamping world.


Hall 7, stand 7209.

Blechexpo 2015, Stuttgart
30. 09. 2015

Expression of thanks, MSV 2015, Brno

We appreciate the chance of meeting you in our stand during passed International Engineering Fair and we look forward to meeting you again in 2016. Thank you very much .

KONTURA TOOLS team

Expression of thanks, MSV 2015, Brno
25. 09. 2015

MSV 2015, Brno

As usual, we exhibit our products with our partners at the Engineering Trade Fair in Brno, stand 048, hall B.

During the period from September 14, 2015 to September 18, 2015, we will be pleased to welcome you at the stand of the company KONTURA TOOLS at hall B, stand 048.

 

MSV 2015, Brno
07. 07. 2015

New catalogues of the company AGATHON AG

In 2012, the company AGATHON AG is coming with its new catalogue of guide elements. It contains new technical solutions, including patented new products.

The catalogue will be prepared for distribution in its printed form, including CD, from February 2012.

 

 

 

New catalogues of the company AGATHON AG
05. 02. 2012

New agency of the company SCHMID

With the new shareholder of the company FEINTOOL AG, restructuring of the company FEINTOOL is also starting, including its branches.

New agency of the company SCHMID
04. 06. 2011

Centring system for moulds and stamping tools - FEINZENTRIERUNG

With continuously increasing requirements for accuracy of plastic stamped parts, we present to you a new product, the centring system of guides from the company Agathon with prestressed rollers (patent) for demanding applications of injection moulding.

 

Centring system for moulds and stamping tools - FEINZENTRIERUNG
01. 06. 2011

Expression of thanks, MSV 2010, Brno

We thank our customers for visiting our stand at the trade fair.


We exhibit our products for you and thanks to you. We look forward to meeting with you again in 2011.

 

Expression of thanks, MSV 2010, Brno
30. 09. 2010

Die set of CARBON from the company AGATHON AG

Nonsense at the first sight? No! Thanks to its properties, CARBON is very suitable for producing plates and die sets.

Die set of CARBON from the company AGATHON AG
05. 01. 2010

BRUDERER with long table 1250 mm is here!

The automatic press BSTA 510-125B is taking up a leading position. For demanding applications in the automotive sector, the automatic machine offers the table longer by 15 cm, thus meeting the requirements for progressive module tools.

BRUDERER with long table 1250 mm is here!
30. 04. 2009

Straightening machines of parts SCHUBERT have been taken over by the company SOPREM

After transferring the SCHUBERT brand under the company SOPREM, today machines for straightening of parts are produced combining two advantages – the design of the company SCHUBERT and the driving and control units of the company SOPREM.

Straightening machines of parts SCHUBERT have been taken over by the company SOPREM
04. 04. 2009

Equipment for grinding of piercing punches DIN, ISO and others – total length up to 120 mm.

Operative helper directly in the stamping shop and tooling shop.

The agent is designed for grinding of shearing diameters of stepped punches and, if necessary, also their shortening. You can simply change the diameter of piercing punches to the required value.

24. 03. 2009

Agency of the company Märkische Stanz-Partner GmbH – standard squares for stamping tools

Dear business partners,
I am very pleased to present to you new products of the company MSPN. The company Märkische Stanz-Partner, with its registered office at Lüdenscheid /DE/, is a traditional supplier of standard squares for stamping tools.
 

Agency of the company Märkische Stanz-Partner GmbH – standard squares for stamping tools
01. 12. 2008

Agency of the company AGATHON, guide elements for stamping tools and moulds

Dear business friends,
I am pleased to inform you of our new partner with whom we will cooperate in the Czech and Slovak markets.

Agency of the company AGATHON, guide elements for stamping tools and moulds
18. 11. 2008

New agency of the company SOPREM

At the beginning of 2008, the company KONTURA TOOLS s.r.o. got an important agency, the Swiss company SOPREM AUTOMATION AG.

New agency of the company SOPREM
02. 03. 2008

Calendars for 2008

Traditionally, our Swiss partners, i.e. the companies FEINTOOL and BRUDERER, have prepared for you wall calendars for the following year.

Calendars for 2008
15. 11. 2007

Manual ”Forming and fineblanking“

The manual ”Forming and fineblanking“ includes the complex description of material properties and technology of producing highly resistant and precise parts from steel with high strength.

Manual ”Forming and fineblanking“
24. 08. 2007

Servo feed units, type BSV in ”stand alone“ design

Putting the servo feed units on the market as integrated solutions for the B-control in spring 2005 was only followed by the control-independent variants as ”stand alone“ design to be retrofitted to Bruderer stamping presses.

Servo feed units, type BSV in ”stand alone“ design
10. 07. 2007

Highly efficient automatic press BSTA 200-60BE

Especially due to the pressure from Asia and Eastern Europe, the optimal possibilities of reducing production costs are more and more taken into consideration through automations and constantly increasing speeds. However, investment costs will become more and more important.

Highly efficient automatic press BSTA 200-60BE
08. 07. 2007

Fineblanking – more than only a method of production

The process chain for sheet metal processing has changed fundamentally over the last 20 years.

Fineblanking – more than only a method of production
02. 07. 2007

New Year wishes 2019

We would like to thank  you   for your confidence and cooperation in this year. To the New Year 2019  we wish you a lot of health, happiness and success in work  and personal life.

We are looking forward to further cooperation with you.

Your  KONTURA Team

New Year wishes 2019
20. 12. 2018

Thank you for the visit on EUROBLECH 2018

We thank all visitors for visiting our partners' stands at EUROBLECH 2018 in Hannover.

Thank you for the visit on EUROBLECH 2018
29. 10. 2018

Thanks for the visit on MSV 2018

Thank you for visiting our stand and we will be glad if we can welcome you next year, too.

The MSV will take place on 5 days from Monday, 07. October to Friday, 11. October 2019 in Brno.We will look forward to enjoying our traditional location, in Hall B.

Thanks for the visit on MSV 2018
09. 10. 2018

Invitation to MSV 2018, 1.10.-5.10.2018

Dear our business friends!

The jubilee 60th International Engineering Fair knocks the door. The MSV will be held from 1st to 5th October 2018.
 We would like to invite you to visit our stand NO.: 057 in Pavilion B.


We are  looking forward to your visit in our stand
Your KONTURA TOOLS

Invitation to MSV 2018, 1.10.-5.10.2018
01. 09. 2018

100th ANNIVERSARY OF AGATHON COMPANY

The Swiss company Agathon founded 100 years ago by Mr. Leo Pfluger in 1918.


From the beginning, Agathon has been dealing with the precision of the guiding elements.

100th ANNIVERSARY OF AGATHON COMPANY
02. 03. 2018

75TH ANNIVERSARY OF BRUDERER COMPANY

It all started 75 years ago when BRUDERER company founded Mr. Egon Bruderer. His work has made BRUDERER famous throughout the world with high quality pressing.

75TH ANNIVERSARY OF BRUDERER COMPANY
01. 03. 2018

New Year wishes 2018

Dear business partners!

We would like to wish you merry Christmas, full of joy, tranquility, fulfilled wishes, nice meetings and magical moments.

At the same time we thank you very much for your favor and we look forward to further cooperation in 2018.

Your KONTURA

New Year wishes 2018
15. 12. 2017

Thanks for the visit on MSV 2017

Thank you very much for visiting our stand on International Engineering Fair and we will be glad if we can welcome you next year,too.
The jubilee 60th MSV will be held from 1st to 5th October 2018.

Thanks for the visit on MSV 2017
16. 10. 2017

Invitation to MSV 2017, 9.10.-13.10.2017

Dear business friends!
The International fair is already outside the door and therefore we would like to invite you to our stand.
You will find us in hall B, stand 57.

We look forward to you!
Your KONTURA
 

 

 

Invitation to MSV 2017, 9.10.-13.10.2017
02. 10. 2017

Holiday in Kontura Tools

Notice:


Dear Business Partners!
We would like to inform you that the whole company KONTURA TOOLS s.r.o. will have holiday in the period from July 31, 2017 to August 11,2017. We kindly ask you to send your potential orders and  requests except this period. Thank you very much for understanding.

Your Kontura

Holiday in Kontura Tools
11. 07. 2017

MSV 2017, BRNO

Dear business partners,

The International Engineering Fair will take place this year from 9th to 13th October at the Exhibition Center in Brno, whose preparations are in full processing.
  Again, the main theme will be "Industry 4.0 or the Fourth Industrial Revolution".

We will be glad to welcome you again on our stand, 57.

MSV 2017, BRNO
25. 04. 2017

Happy Easter

We wish to everyone wonderful blessed Easter.

Your KONTURA

Happy Easter
13. 04. 2017

Training in BRUDERER, Switzerland

In the last week, our team attended training on high-speed presses in BRUDERER in Switzerland.

 

Training in BRUDERER, Switzerland
17. 01. 2017

New Year wishes 2017

Dear business partners!

We would like to thank you for your cooperation in 2016 and  wishing you many personal and professional successes in 2017.

New Year wishes 2017
14. 12. 2016

EuroBLECH 2016, Hannover, Germany

Our partners exhibiting at the largest trade fair for sheet metal processing EuroBLECH, 2016.
Date:

 from 25th October to 29th October 2016

Opening time:

Tuesday to Friday from 9a.m. to 6p.m.

Saturday from 9a.m. to 3p.m.

EuroBLECH 2016, Hannover, Germany
25. 10. 2016

Looking back to the International Engineering Fair 2016

We would like to thanks all visitors for visiting our stand at the International Engineering Fair 2016 in Brno.

Looking back to the International Engineering Fair 2016
10. 10. 2016

15th anniversary of the KONTURA TOOLS

On the occasion of the 15th anniversary of the company KONTURA TOOLS, we would like to sincerely thank you for the cooperation to our partners, customers and colleagues, but also directors of the company, Mr. Volejník.

Thanks to all of you that our company KONTURA TOOLS could celebrated the 15th anniversary on the Czech and Slovak market.

 

 
15th anniversary of the KONTURA TOOLS
09. 09. 2016

AGENCY OF THE COMPANY DI.GI.EMME, tools for transfer systems and complete transfer lines according to customers

Representation with new partner Di.Gi.Emme for Czech and Slovak market, we can offer the transfer technology (the tools and transfer units) to complete transfer lines.

Compared to the production technology of progressive tools achieve significant savings material.

 

AGENCY OF THE COMPANY DI.GI.EMME, tools for transfer systems and complete transfer lines according to customers
09. 05. 2016

AGENCY OF THE COMPANY OTI PRESSE, MECHANICAL, LEVER DRIVE AND TRANSFER PRESSES

Agency of the company Oti Presse (Officine Tecnomeccaniche Italiane) we are expanding our range stamping technology of significant partner. We come up with an offer for the supply of mechanical presses from 600kN to 8000kN.

 

 

AGENCY OF THE COMPANY OTI PRESSE, MECHANICAL, LEVER DRIVE AND TRANSFER PRESSES
09. 05. 2016

MSV 2016, BRNO

Dear business partners!

We are preparing the next edition of the International fair which will take place between 3rd October to 7th October 2016. So, you can note this date to your calendar. As always, we will be really pleased to meet you in Brno.

You will find us on same place as last year, hall B, stand 65.

 

MSV 2016, BRNO
07. 03. 2016

FIRST STEPS IN STAMPING

Already in elementary schools lead our children to stamping.

The first steps in learning the pressing technique: cutting, straightening and bending, Lucie, 11 years.

FIRST STEPS IN STAMPING
26. 01. 2016

New Year wishes 2016

Dear business partner!

We would like  to thank you  on behalf  of our company  Kontura Tools s.r.o. for your cooperation and next year we wish you a lot of success in work  and personal life.

We look forward to further cooperation.

 Your KONTURA

New Year wishes 2016
16. 12. 2015

Looking back to the Blechexpo 2015

We would like to thanks all visitors for visiting our partners' booths at the fair Blechexpo 2015 in Stuttgart.

Looking back to the Blechexpo 2015
09. 11. 2015

Blechexpo 2015, Stuttgart

During entire Blechexpo Fair 2015 from 3.-6. November will be for you avaible Mr. Dušan Volejník, director Kontura Tools and representative of our partners on the Czech and Slovak market. You can find him on the stands of our partners or on the mobile phone + 420 777 945 957.

We are looking forward to your visit.

Blechexpo 2015, Stuttgart
07. 10. 2015

Blechexpo 2015, Stuttgart

As an innovation, Agathon AG shows at the Blechexpo  the further development of the backlash-free Round Fine Centering System for centering two plates/mold halves in mold construction (patent pending).

Hall 5, stand 5409

Blechexpo 2015, Stuttgart
02. 10. 2015

Blechexpo 2015, Stuttgart

We would like to invite you to the 12. Blechexpo exhibition in Stuttgart from 3. – 6. November 2015, where Bruderer will present the best from stamping world.


Hall 7, stand 7209.

Blechexpo 2015, Stuttgart
30. 09. 2015

Expression of thanks, MSV 2015, Brno

We appreciate the chance of meeting you in our stand during passed International Engineering Fair and we look forward to meeting you again in 2016. Thank you very much .

KONTURA TOOLS team

Expression of thanks, MSV 2015, Brno
25. 09. 2015

MSV 2015, Brno

As usual, we exhibit our products with our partners at the Engineering Trade Fair in Brno, stand 048, hall B.

During the period from September 14, 2015 to September 18, 2015, we will be pleased to welcome you at the stand of the company KONTURA TOOLS at hall B, stand 048.

 

MSV 2015, Brno
07. 07. 2015

New catalogues of the company AGATHON AG

In 2012, the company AGATHON AG is coming with its new catalogue of guide elements. It contains new technical solutions, including patented new products.

The catalogue will be prepared for distribution in its printed form, including CD, from February 2012.

 

 

 

New catalogues of the company AGATHON AG
05. 02. 2012

New agency of the company SCHMID

With the new shareholder of the company FEINTOOL AG, restructuring of the company FEINTOOL is also starting, including its branches.

New agency of the company SCHMID
04. 06. 2011

Centring system for moulds and stamping tools - FEINZENTRIERUNG

With continuously increasing requirements for accuracy of plastic stamped parts, we present to you a new product, the centring system of guides from the company Agathon with prestressed rollers (patent) for demanding applications of injection moulding.

 

Centring system for moulds and stamping tools - FEINZENTRIERUNG
01. 06. 2011

Expression of thanks, MSV 2010, Brno

We thank our customers for visiting our stand at the trade fair.


We exhibit our products for you and thanks to you. We look forward to meeting with you again in 2011.

 

Expression of thanks, MSV 2010, Brno
30. 09. 2010

Die set of CARBON from the company AGATHON AG

Nonsense at the first sight? No! Thanks to its properties, CARBON is very suitable for producing plates and die sets.

Die set of CARBON from the company AGATHON AG
05. 01. 2010

BRUDERER with long table 1250 mm is here!

The automatic press BSTA 510-125B is taking up a leading position. For demanding applications in the automotive sector, the automatic machine offers the table longer by 15 cm, thus meeting the requirements for progressive module tools.

BRUDERER with long table 1250 mm is here!
30. 04. 2009

Straightening machines of parts SCHUBERT have been taken over by the company SOPREM

After transferring the SCHUBERT brand under the company SOPREM, today machines for straightening of parts are produced combining two advantages – the design of the company SCHUBERT and the driving and control units of the company SOPREM.

Straightening machines of parts SCHUBERT have been taken over by the company SOPREM
04. 04. 2009

Equipment for grinding of piercing punches DIN, ISO and others – total length up to 120 mm.

Operative helper directly in the stamping shop and tooling shop.

The agent is designed for grinding of shearing diameters of stepped punches and, if necessary, also their shortening. You can simply change the diameter of piercing punches to the required value.

24. 03. 2009

Agency of the company Märkische Stanz-Partner GmbH – standard squares for stamping tools

Dear business partners,
I am very pleased to present to you new products of the company MSPN. The company Märkische Stanz-Partner, with its registered office at Lüdenscheid /DE/, is a traditional supplier of standard squares for stamping tools.
 

Agency of the company Märkische Stanz-Partner GmbH – standard squares for stamping tools
01. 12. 2008

Agency of the company AGATHON, guide elements for stamping tools and moulds

Dear business friends,
I am pleased to inform you of our new partner with whom we will cooperate in the Czech and Slovak markets.

Agency of the company AGATHON, guide elements for stamping tools and moulds
18. 11. 2008

New agency of the company SOPREM

At the beginning of 2008, the company KONTURA TOOLS s.r.o. got an important agency, the Swiss company SOPREM AUTOMATION AG.

New agency of the company SOPREM
02. 03. 2008

Calendars for 2008

Traditionally, our Swiss partners, i.e. the companies FEINTOOL and BRUDERER, have prepared for you wall calendars for the following year.

Calendars for 2008
15. 11. 2007

Manual ”Forming and fineblanking“

The manual ”Forming and fineblanking“ includes the complex description of material properties and technology of producing highly resistant and precise parts from steel with high strength.

Manual ”Forming and fineblanking“
24. 08. 2007

Servo feed units, type BSV in ”stand alone“ design

Putting the servo feed units on the market as integrated solutions for the B-control in spring 2005 was only followed by the control-independent variants as ”stand alone“ design to be retrofitted to Bruderer stamping presses.

Servo feed units, type BSV in ”stand alone“ design
10. 07. 2007

Highly efficient automatic press BSTA 200-60BE

Especially due to the pressure from Asia and Eastern Europe, the optimal possibilities of reducing production costs are more and more taken into consideration through automations and constantly increasing speeds. However, investment costs will become more and more important.

Highly efficient automatic press BSTA 200-60BE
08. 07. 2007

Fineblanking – more than only a method of production

The process chain for sheet metal processing has changed fundamentally over the last 20 years.

Fineblanking – more than only a method of production
02. 07. 2007